07/17/2021

• Bug XEO-10: Camera and Up vector not perpendicular for "corner positions" of nav cube (Subproject: Xeokit)
  updated by Lindsay Kay on 07/17/2021 10:36 AM
  • Comment added

    Sorry this bug is taking so long, I'll try again on Sunday.
    BTW I have been testing the orthogonality of the vectors. Eg...

• Bug XEO-10: Camera and Up vector not perpendicular for "corner positions" of nav cube (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/17/2021 08:09 AM
  • Comment added

    Hey Lindsay Kay , thank you for the late fix. Unfortunately it is not fixed yet. There are two issues where orthogonalit...

  • Assignee changed from Wieland Lindenthal to Lindsay Kay
• Bug XEO-10: Camera and Up vector not perpendicular for "corner positions" of nav cube (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/17/2021 08:03 AM
  • Status changed from needs review to test failed
  • File image.png added as attachment
  • File image.png added as attachment

07/16/2021

• Feature STB-7: Refresh button
  updated by Wieland Lindenthal on 07/16/2021 09:21 PM
  • Status changed from in development to needs review
• Feature STB-7: Refresh button
  updated by Wieland Lindenthal on 07/16/2021 08:47 PM
  • Project changed from OpenProject Revit Add-in to Stream BIM
  • Status changed from new to in development
  • Version changed from 12.0.0 to 11.4.0
• Feature STB-8: BCF module: Change default order to ID DESC.
  updated by Wieland Lindenthal on 07/16/2021 08:46 PM
  • Status changed from new to needs review
  • Version changed from 12.0.0 to 11.4.0
• Feature STB-8: BCF module: Change default order to ID DESC.
  updated by GitHub ⁤ on 07/16/2021 08:45 PM
  • Comment added

    PR Ready for Review: Pull request 9464 [STB-8] BCF module: Change default order to ID DESC. for opf/openproject was mark...

• Feature STB-8: BCF module: Change default order to ID DESC.
  updated by GitHub ⁤ on 07/16/2021 09:50 AM
  • Comment added

    PR Opened: Pull request 9464 [STB-8] BCF module: Change default order to ID DESC. for opf/openproject has been opened by...

• Feature STB-8: BCF module: Change default order to ID DESC.
  created by Wieland Lindenthal on 07/16/2021 09:45 AM

07/15/2021

• Bug XEO-10: Camera and Up vector not perpendicular for "corner positions" of nav cube (Subproject: Xeokit)
  updated by Lindsay Kay on 07/15/2021 06:32 PM
  • Comment added

    Wieland Lindenthal I have finally fixed this one - I was only normalizing one of the vectors. Now fixed, by normalizing ...

  • Status changed from test failed to needs review
• Bug XEO-9: Orthogonal mode: Clipping planes gizmo is slow when tilting and direction sometimes are inverted (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/15/2021 12:10 PM
  • Status changed from tested to merged
• Bug XEO-8: Xeokit viewer crashes when slicing planes tool is active (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/15/2021 12:10 PM
  • Status changed from in review to merged
• Bug XEO-9: Orthogonal mode: Clipping planes gizmo is slow when tilting and direction sometimes are inverted (Subproject: Xeokit)
  updated by GitHub ⁤ on 07/15/2021 12:10 PM
  • Comment added

    PR Merged: Pull request 9456 Bump xeokit-bim-viewer to 2.3.0.alpha.4 for opf/openproject has been merged by wielinde.

• Bug XEO-8: Xeokit viewer crashes when slicing planes tool is active (Subproject: Xeokit)
  updated by GitHub ⁤ on 07/15/2021 12:10 PM
  • Comment added

    PR Merged: Pull request 9456 Bump xeokit-bim-viewer to 2.3.0.alpha.4 for opf/openproject has been merged by wielinde.

07/14/2021

• Bug XEO-9: Orthogonal mode: Clipping planes gizmo is slow when tilting and direction sometimes are inverted (Subproject: Xeokit)
  updated by GitHub ⁤ on 07/14/2021 08:48 PM
  • Comment added

    PR Opened: Pull request 9456 Bump xeokit-bim-viewer to 2.3.0.alpha.4 for opf/openproject has been opened by wielinde.

• Bug XEO-8: Xeokit viewer crashes when slicing planes tool is active (Subproject: Xeokit)
  updated by GitHub ⁤ on 07/14/2021 08:48 PM
  • Comment added

    PR Opened: Pull request 9456 Bump xeokit-bim-viewer to 2.3.0.alpha.4 for opf/openproject has been opened by wielinde.

• Bug XEO-11: When applying a BCF viewpoint it should not auto fit (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/14/2021 07:27 PM
  • Comment added

    Hey Lindsay Kay , I just updated to @xeokit/xeokit-bim-viewer@2.3.0-alpha.4. However, I still observe the same behavior....

  • Status changed from in test to test failed
  • File view_fit_between_2_viewpoints_in_different_modes.gif added as attachment
• Bug XEO-11: When applying a BCF viewpoint it should not auto fit (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/14/2021 07:15 PM
  • Status changed from new to in test
• Bug XEO-9: Orthogonal mode: Clipping planes gizmo is slow when tilting and direction sometimes are inverted (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/14/2021 07:15 PM
  • Status changed from in review to tested
• Bug XEO-8: Xeokit viewer crashes when slicing planes tool is active (Subproject: Xeokit)
  updated by Wieland Lindenthal on 07/14/2021 07:13 PM
  • Status changed from needs review to in review
• Feature STB-6: Amend clipping plane direction
  updated by Wieland Lindenthal on 07/14/2021 07:11 PM
  • Description changed (Details)
  • Status changed from needs review to merged
  • Assignee deleted (Eric Schubert)
• Feature STB-6: Amend clipping plane direction
  updated by GitHub ⁤ on 07/14/2021 07:10 PM
  • Comment added

    PR Merged: Pull request 9446 Add migration for flipping clipping planes that were created in OP for opf/openproject has ...

• Feature STB-6: Amend clipping plane direction
  updated by GitHub ⁤ on 07/14/2021 05:40 PM
  • Comment added

    PR Merged: Pull request 9422 [STB-6] Amend clipping plane direction in bcf viewer for opf/openproject has been merged by...

• Feature STB-6: Amend clipping plane direction
  updated by Wieland Lindenthal on 07/14/2021 05:27 PM
  • Status changed from in progress to needs review
• Feature STB-6: Amend clipping plane direction
  updated by GitHub ⁤ on 07/14/2021 05:25 PM
  • Comment added

    PR Ready for Review: Pull request 9446 Add migration for flipping clipping planes that were created in OP for opf/openpr...

• Feature STB-6: Amend clipping plane direction
  updated by GitHub ⁤ on 07/14/2021 05:25 PM
  • Comment added

    Referenced in PR: wielinde referenced this work package in Pull request 9446 Add migration for flipping clipping planes ...

• Feature STB-6: Amend clipping plane direction
  updated by GitHub ⁤ on 07/14/2021 05:18 PM
  • Comment added

    PR Ready for Review: Pull request 9422 [STB-6] Amend clipping plane direction in bcf viewer for opf/openproject was mark...

• Feature STB-6: Amend clipping plane direction
  updated by Wieland Lindenthal on 07/14/2021 05:17 PM
  • Description changed (Details)
• Feature STB-6: Amend clipping plane direction
  updated by Wieland Lindenthal on 07/14/2021 04:58 PM
  • Version set to 12.0.0
• Feature STB-6: Amend clipping plane direction
  updated by Wieland Lindenthal on 07/14/2021 03:41 PM
  • Type changed from Task to Feature
  • Project changed from BCF Model Viewer to Stream BIM
  • Requires doc change set to No

07/13/2021

• Bug STB-2: Work package exports fail when column "BCF snapshot" active
  updated by Oliver Günther on 07/13/2021 03:59 PM
  • Status changed from needs review to in development
  • Assignee set to Wieland Lindenthal