Hello,

I am trying to follow this wiki instruction to install Open Project
https://www.openproject.org/projects/openproject/wiki/Installation_Ubuntu_Package

When I type first command
wget qO https://deb.pkgr.io/key | sudo apt-key add -
It says gpg: no valid OpenPGP data found
And I type the rest of commands, and it finally says cannot locate Project Open

Would anyone please help on this?

Best Regards,
Andy Ko

Hello Andy,

the thing is that pkgr.io only supports 64bit systems.

I noticed that I haven’t listed that requirement in our wiki page (sorry for that!). Thus, I edited the page to link to the original instructions at https://pkgr.io/apps/tessi/openproject/ — they are up to date.

cheers,
Philipp

Dear Philipp,

Thanks a lot. That means I need to open a 64-bits VM. Thanks.

Best Regards,
Andy Ko

Philipp Tessenow wrote:

Hello Andy,

the thing is that pkgr.io only supports 64bit systems.

I noticed that I haven’t listed that requirement in our wiki page (sorry for that!). Thus, I edited the page to link to the original instructions at https://pkgr.io/apps/tessi/openproject/ — they are up to date.

cheers,
Philipp

Hello Philipp

I have the same problem en Ubuntu 14.04 LTS 64 bits when I type first command wget qO https://deb.packager.io/key | sudo apt-key add -
, please help me.

Hi,

can you try to do the following:

apt-get install -y ca-certificates

It might be that your certificates are not installed (for whatever reasons).

cheers,
Philipp

Hi,

I’m new on this forum and for OpenProject !

Is there any possibility to install through package OpenProject on a 32 bits machine ?

I would like to test it on a Ubuntu 12.04 LTS i686 (32bits) server machine.

Thanks for help

Vincent

Hi Vincent,

unfortunately not. We use the packager.io service for building the OpenProject packages. See the supported distribution page of packager.io for more information.

Cheers,
Karsten

Well, I am using a 64bit physical machine on which I am running a 64bit virtual machine on which I have Ubuntu 64bit installed. Yet I still get the “no valid OpenPGP data found” message. Any other reason for this?
Cheers
Grisi